how ot set apple server os x without dhcp

#HOW OT SET APPLE SERVER OS X WITHOUT DHCP HOW TO#

For the Subnet Mask, use 255.255.255.0 - For Connect Spark Pro use netmask of 255.255.0.0Īt this point you should be able to access your Connect Spark interface. (for the example, I used 192.168.100.20 - For Connect Spark Pro, establish an IP address in the APIPA address block (such as 169.254.0.254).

In the IPv4 Address field, use anything in the range, except for 1, 255, or 168.From the Configure IPv4 menu, select Manually.For our purposes today, you'd want to select 'Ethernet'. From the sidebar, select an active network interface.From the Apple menu, select System Preferences.

#HOW OT SET APPLE SERVER OS X WITHOUT DHCP HOW TO#

Further instruction on this specific process can be sourced here: How to Configure Network Locations in OS X. This will allow you to use the static IP address for certain networks and not others.

If you own a MacBook, you may want to create a new network location.

Connect the Spark and the Mac directly into each other via standard Cat6 networking cable - *Note - This will require a crossover cable connection for your Mac. You'll first want to install the latest NDI-HX driver on the Mac ( )Ģ. For this example, we'll use a Spark HDMI and a Mac running OS X.ġ. The way around this is to set up a static IP on each device connected to the switch. These are great switches for portability and cost, but without a server, each device connected to it will generate it's own IP address and may not see each other. Sometimes, a switch is used on an isolated network that does not have a DHCP server built into it.

How ot set apple server os x without dhcp